Case studies

The following testimonials show how companies have successfully implemented FARO’s solutions into their business. Learn about the challenges they faced, the solutions they chose, as well as the return on investment and efficiencies they achieved.

  • FARO Enables a Five-fold Increase in Measurement Efficiency for Calsonic Kansei Korea

    Automotive: Calsonic Kansei Korea Co., Ltd
    “I remember my first encounter with the FaroArm, where we used it to survey contour lines and the cross-section of our pipes and pressed parts,” recalled the Deputy Head of the Quality Assurance team. “It worked very well!”
  • Buyken Metal Gains Speed, Consistency, and Accuracy using a FaroArm

    “For Buyken Metal, it’s difficult to put a dollar amount on our savings by implementing FARO. Our defined cost of quality, our scrap rate, and our on-time delivery percentage have all shown marked improvement since we acquired our FaroArm. I am sure FARO has made a significant contribution to the savings we realize with the speed, consistency, and accuracy of the system.“
  • Applying 3D Metrology in QA and Reverse Engineering with Andretti Autosport

    Today’s new 3D metrology technology is making an impact on the design of championship Indy racecars. In this webcast, engineer Brent Knutson of Andretti Autosport® discusses the state of 3D metrology and laser scanning technology and its applications in design, reverse engineering and quality assurance practices.
  • ARJ Recommends the FARO Edge ScanArm as the Way of the Future

    “I want to get the word out. I tell everyone I can about this technology and show them how it works for us. I recommend FARO to everyone. This is a whole new level of measurement and process and should be in every tool and production shop. THIS is what they should be using too,” said Mr. Reagan. “I’m a tool maker and this is the way of the future. If you know die making and quality and processes, this tool will save you millions! I love it!”
  • Callies Performance Stays Ahead of the Competition Using FaroArms

    “We use the FaroArm for many different measurements and programs. FARO saves us a lot of time in many instances and that means it saves us money. We have seen not only reduced time and money savings, but we have also improved our processes and capabilities. We have definitely benefited from the use of FARO.”
  • Oil States Improves Precision While Reducing Costs and Backlogs with FARO

    Since deploying their first FaroArm back in 2000, Oil States Texas Mold has upgraded over time and now uses the high accuracy FARO Prime and FARO Edge. Using a FaroArm, they can access multiple measurement results from one set-up and can easily obtain geometric associations, thereby improving throughput as a result and reducing backlogs.
  • Restoration Made Easy with the Focus3D Laser Scanner

    Providing critical data for restorations to historical landmarks and venues can often be challenging to even the most experienced surveyors. The John Ford Amphitheatre, which was built in 1931, proved to be no exception. Utilizing the FARO Focus3D Laser Scanner became a significant benefit for the Mollenhauer Group as they proceeded to carry out a detailed survey of the complete site.
  • Goldens’ Foundry Reduces Inspection Times by Over 90% using a FARO Edge

    The fast, and easy, setups with the Edge have greatly impacted the overall efficiency of the floor. Total check time for parts that once took 45 minutes and three position changes on a traditional CMM, are now done in only 2 and half minutes using the FARO Edge – a reduction of over 90%.

Contact us

Toll Free: (800) 736-0234
Direct Dial: (407) 333-9911

Download Center


Access additional case studies, along with white papers, tech sheets, webinar recordings, and more.