fbpx

Events

FARO High-Speed Laser Scanning Denmark – 26th February

Dates: 26 Feb, 2020 - 26 Feb, 2020
Location: NTI A/S Jens Ravns Vej 11B, 7100 Vejle DK

 

 

Interested in 3D Laser Scanning and software solutions?

NTI and FARO reveal the ultimate solution in the High Speed Laser Scanning Days in Denmark. 

          When:   Wednesday 26th 2020 

          Where: NTI A/S Jens Ravns Vej 11B, 7100 Vejle DK

          Time:    08:30 AM – 15:30 PM 

FARO and NTI presents high-speed digitalisation with 3D Laser Scanning and Software solutions – a new and revolutionary way to ease your workflow.  

  • Open up for Plant, Process & Design, BIM and quality control with new possibilities: Digitalise your old plant and building and perform quality checks on your new ones.
  • Be the first to experience FARO’s latest solutions for high-speed laser scanning and direct data analysis during this day.
  • Watch and learn directly from our customers and ask them about their experiences and problems solved directly through the use of FARO’s laser scanning solution. 

“Speed up with FARO”

By participating at this event, you will:

  • Receive personal advice and feedback from our experts on site
  • Gain insight into how FARO’s ecosystem enables uniform workflows from accurate As-Built measurements to create CAD and BIM models.
  • Discover how FARO’s latest reality capture innovations can help you increase productivity in 3D data capture, and how 3D planning and processing can be used throughout all phases of the building life cycle.

Agenda:

8:30 – 8:45       Welcome and introduction            

8:45 – 9:45       Presentation and live demo of our new high-speed laser scanning solutions: Focus Swift & As-Built Modeler Software  

9:45 – 10:00     Coffee break

10:00 – 11:00    FARO Focus S and Scene 2019 latest news  

11:00– 11:30     BuildIT Construction latest news  

11:30 – 12:15     Live-Demo Faro Swift and WebShare Cloud

12:15 – 13:15     NTI A/S invites you for a light lunch

13:20 –              Track I or Track II, see below

 

In the afternoon you will have the choice to decide Track I or Track II, please see details to these sessions below:

 

Track I – Customer projects and solutions – Process & Industry

13.20 – 14.00   Flemming Madsen Mechanical Engineer, Semco Maritime Scanning of offshore facilities, retrofit, solutions using Argumenta Reality (AR) and online verification via Virtual Reality (VR)
14.00 – 14.20   Coffee and questions

14.20 – 15.00   Per Damsgaard / NTI Project Manager Brønderslev Heat Plant – Scanning and digitalisation of a complete Process & Plant installation, digitising pipes and installations with FARO As-Built and examples of the actual deviations between what was built and what was planned.

15:00 –              Questions to FARO and NTI

 

Track II – AEC

13:20 – 14:00   Jens Hallkvist, System Consultant and Land Surveyor NTI A/S – Jeudan customer case – we created point clouds using scanning and drone data capture which was used as a basis for creating BIM models – both inside and outside.

Measuring methods:

  • Drone data capture and land coordinates (DKTM3) as a single point cloud
  • Matterport scanning with accuracy equal to 1% reality. Inside for part of the ground floor as a single point cloud
  • Scanning with FARO, an accuracy of 1mm per 10 meters. Inside for the ground floor and the outside put together for a single point cloud which enabled us to build a complete BIM model

In this way, we were provided with an overview of measurement methodologies and their accuracy, which is essential for our customers within the BIM world. Which measurement should be used for the task and can these methods be used together? And how to use this to achieve a real digital world? 

14.00 – 14.20   Coffee and questions

14.20 – 15.00   Lars Albjerg, Global BIM Manager NNE A/S Use of point cloud in the pharmaceutical industry Utilising 3D scan for design. Get an insight into how NNE uses FARO scanners in their projects – where can point clouds be used in the pharmaceutical industry? Hear about the benefits and challenges of a typical workflow, from scanning in classified areas, to processing confidential scan data in FARO Scene, to design and coordinate models in Plant 3D, Revit and Navisworks, and on to customer presentations and instructional models in AR/VR.

15:00                Questions to FARO and NTI

 

 

 

 
 
 

CUSTOMER SERVICE

Need assistance with your FARO product?

Visit Technical Support

Our site has been updated.

If you already have an account, please register again.