Webinar: Digital Industrial Plant – Benefits and Payback for Plant Design, Construction and Operation

Webinar Overview:


This webinar aims to explore the challenges and the benefits of Digital Industrial Plant on the 3D Solutions available to assist and improved deliverable workflow.

Who Should Attend: Project Engineer/Managers, Facility Management, Process Engineers, Maintenance Engineers, 3D Plant Designers, Asset Owner/Operators, Engineering/Construction Firms, etc. who need to work on the plant for the construction and operation.
 

 

Webinar Details


Industry Trends

Industrial Plant is one of the most complex industrial infrastructure for the project engineers, owners, and etc. It has a long life cycle that could span over a few decades. They are costly to build and require substantial resources to operate.

Hence, information used for maintenance and operation is critical to success. The challenge we are facing today is in the assets such as pipes, were built before 3D technology was developed. Then, the drawings were constructed on drawing board in 2D format. The process was not only time consuming, it was costly as well.

Throughout the lifespan of the assets, numerous works such as upgrading and revamp were made to maintain the integrity of the structures. However, in the absence of suitable technology, there was no proper recording of the upgrading and maintenance activities. The lack of digital information to track the development of the assets remains a challenge.

As such, discrepancies between the information available on the asset on record and in physical form have been observed.

FARO 3D laser scanning solution enables the conversion of the actual physical asset information into digital or data equivalent; simplifying the process to capture as-built condition of assets. Laser scanning can capture extreme high-resolution 3D data very quickly up to 1 million point/sec without any physical contact. Each of the point/sec scanning data provides X, Y, Z coordinate with intensity value. Data captured in the laser scanner is then transferred to the desktop for designer to process it.

Webinar Topics

  • Trends and Challenges in Digital Industrial Plant
  • Overview of FARO Solutions
  • Streamline the Workflow
  • Benefits of Applying 3D Scanning Solutions
  • Success Stories

Industries

  • Industrial Plants that require 3D Laser Scanner Solution on workflow and as-built documentation.

 

Related FARO Products


FARO Focus Laser Scanner

FARO Focus Laser Scanner

Laser Scanner for fast and exact indoor and outdoor measurements in three dimensions, perfect for 3D documentation and surveying in AEC, public safety – forensics and product design.

FARO PointSense Pro

FARO PointSense Pro

PointSense Pro provides several tools for the management and processing of laser scan data within AutoCAD and support the import of almost all currently available 3D laser scan data formats into AutoCAD.

FARO PointSense Plant

FARO PointSense Plant

FARO PointSense Plant provides tools for pattern recognizing plant assets from point cloud data giving designers the ability to move directly into their familiar AutoCAD based plant design programs (Plant 3D, MEP, CADWorx, AutoPlant, etc.). Exact tie-in points for components can also be determined without any modeling.

FARO VirtuSurv

FARO VirtuSurv

VirtuSurv is FARO’s standalone software for working with highly visual laser scan data. The program allows to send measurements from photo-like scan views into various applications of choice (e.g. AutoCAD, Windows, BricsCAD, Rhino, GStarCAD).

 

Webinar: 3D Portable Measurement and Inspection Solutions in the Pre-Production Process in Automotive Manufacturing

Webinar Overview:


This webinar aims to explore the challenges in automotive manufacturing and the 3D metrology solutions available to tackle some of these challenges in the pre-production process.
 
Join us in this webinar to learn about the ease and simplicity of FARO products and solutions in creating efficiencies in the automotive pre-production process.
 

 

Webinar Details


Industry Trends

Automotive production is one of the most common yet complex tasks in the manufacturing world today as it requires the development, production and integration of thousands of different components.

Hence, developing, manufacturing and ensuring accurate and reliable components or sub-assemblies is a constant challenge in the automotive industry since all such parts are produced separately and then brought together to be assembled to each other and to the chassis of the automobile.

The pre-production phase in the automotive development and manufacturing process is an important phase in the whole process as it begins right after the design & development stage and is the stage of launch preparation and readiness for automotive production.

Today, the utilization of portable 3D metrology solutions has superseded traditional methods of measurement and inspection as automotive manufacturers have begun to recognize the benefits of such solutions within their development and manufacturing process.

FARO’s range of portable 3D metrology solutions can be applied in the pre-production phase in automotive manufacturing for inspections such as First Article Inspection, Tool & Jig Inspection and Body-In-White Inspection to increase productivity and reduce cycle time.

Webinar Topics

  • Automotive Manufacturing Challenges
  • Automotive Development and Manufacturing Process
  • Pre-Production Activities and Challenges
  • Various Inspections in Automotive Pre-Production
  • 3D Measurement Solutions
  • Case Studies

Industries

  • Automotive

 

Related FARO Products


FaroArm

FaroArm

The FaroArm is the preeminent portable coordinate measuring machine (PCMM) that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis, reverse engineering, and more.

FARO ScanArm

FARO ScanArm

The Quantum ScanArm HD is ideal for inspection and quality control, offering capabilities such as point cloud comparison with CAD, rapid prototyping, reverse engineering, and 3D modeling of free-form surfaces.

FARO Laser Tracker

FARO Laser Tracker

FARO Laser Trackers optimize workflow productivity management for large-scale metrology applications including, but not limited to, assembly alignment, part and assembly inspection, machine installation and alignment, and reverse engineering.

FARO Cobalt Array Imager

FARO Cobalt Array Imager

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which utilizes blue light technology to capture millions of high resolution 3D coordinate measurements in seconds.

 

Webinar: Improve Accuracies and Speed of Capturing On-site Building Structures for Use in Building Information Modeling (BIM)

Webinar Overview:


This webinar aims to familiarize you with the latest 3D Laser Scanning Technology which can be used to perform various critical measurement tasks within the construction industry.

These applications include creation of 2D drawing, Structural Inspections and 3D Building Modeling. Learn how to use 3D Laser Scanning solution as part of the workflow to simplify process and improve productivity.

Join us in this webinar to learn about the ease and simplicity of FARO products and solutions in creating efficiencies in the Building Information Modeling process.
 

 

Webinar Details


Industry Trends

Building Information Modeling (BIM) has been used for city planning or infrastructure building for decades. Most recently, the applications for leveraging on Building Information Modeling has expanded because of improved scanning technology and expanded software suites for ease of 3D building model creation.

In addition, the heightened awareness of the realizable huge benefits of BIM to companies when used in planning and inspection platforms has continued to drive greater adoption in the construction industry. As a result, BIM implementation has becoming more pervasive in government and private projects.

Laser Scanning in BIM

The first step towards creation of models for use in BIM starts with documenting the existing infrastructures and buildings in the project area. In the past, the capturing of physical is done manually through registration of points with Total Stations or measuring tapes. Thereafter the connection of the points to form a complete building model is created via software. The collection of points on-site had been tedious, inaccurate and time-consuming due to the limitations of the Total stations and other measuring devices.

With the advent of Laser Scanning technology, the Laser Scanner has started to replace Total Stations and traditional measuring devices for capturing of physical structures to translate these point clouds into on-site drawing due to its improved accuracy and speed of scanning. The increased adoption of Laser Scanner has further drove the increased usage of BIM as part of the planning and development processes in the construction industry.

Webinar Topics

  • Trends and Challenges in the Construction Industry
  • Comparisons between Traditional Devices and Laser Scanning Solution
  • Streamlined Workflow from 3D Scan to Deliverables
  • Creation of 2D Drawing
  • Structural Inspections
  • 3D Building Modeling
  • Case Studies

Industries

  • Architecture
  • Construction
  • Engineering
  • Facility Management
  • Heritage
  • Surveying

 

Related FARO Products


FARO Focus Laser Scanner

FARO Focus Laser Scanner

Laser Scanner for fast and exact indoor and outdoor measurements in three dimensions, perfect for 3D documentation and surveying in AEC, public safety – forensics and product design.

FARO Freestyle3D Handheld 3D Scanner

FARO Freestyle3D Scanner

The FARO Freestyle3D is a top-quality high-precision handheld scanner. It quickly and reliably documents rooms, structures and objects in 3D and creates high-definition point clouds.

FARO 3D Software

FARO 3D Software

Solutions for Architecture, Engineering and Construction.

 

Webinar: The Importance of Measurement Accuracy within the Metalworking Industry

Webinar Overview:


This webinar covers the key factors for accuracy and precision in metalworking industry, and the different applications for inspection and reverse engineering; first-article, production, and quality inspection; hot forging and mobile inspection; and in-line inspection.
 
Join us in this webinar to learn about the ease and simplicity of FARO products and solutions in improving production processes and product quality.
 

 

Webinar Details


Industry Trends

The metalworking industry has always placed great emphasis on having tools that can increase measurement accuracy, help with quality control, support reliability, and that can support the objective of ‘making it right the first time’. The need for measurement accuracy has become an even higher priority due to the time- and cost-savings that businesses can potentially achieve.

Webinar Topics

  • Overview of 3D Measurement Solutions for Metalworking Industry
  • Greater Operation Precision
  • Accurate Reporting
  • Lean Manufacturing
  • Work Place Health & Safety Practices
  • Case Studies

Industries

  • Metalworking
  • Machinery
  • Assembly
  • Foundry
  • Machine Shop
  • Machine Tool Manufacturing
  • Mechanical Assembly
  • Metal Fabrication
  • Mold Making

 

Related FARO Products


FaroArm

FaroArm

The FaroArm is the preeminent portable coordinate measuring machine (PCMM) that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis, reverse engineering, and more.

FARO ScanArm

FARO ScanArm

The Quantum ScanArm HD is ideal for inspection and quality control, offering capabilities such as point cloud comparison with CAD, rapid prototyping, reverse engineering, and 3D modeling of free-form surfaces.

FARO Laser Tracker

FARO Laser Tracker

FARO Laser Trackers optimize workflow productivity management for large-scale metrology applications including, but not limited to, assembly alignment, part and assembly inspection, machine installation and alignment, and reverse engineering.

FARO Cobalt Array Imager

FARO Cobalt Array Imager

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which utilizes blue light technology to capture millions of high resolution 3D coordinate measurements in seconds.

FARO CAM2 Measure 10

FARO CAM2 Measure 10

FARO CAM2 Measure 10 is an all-in-one metrology software for users who are looking for a single, complete solution for all tactile measurement and non-contact 3D scanning applications.

 

Webinar: Creating Efficiencies in the Automotive Assembly Plant with Better Measurement Solutions

Webinar Overview:


This webinar aims to familiarize you with the latest 3D metrology technology which can be used to perform various critical measurement tasks within the automotive industry. These applications include non-contact inspection and tactile measurement of assembly tooling, online inspection and root-cause analysis.
 
Join us in this webinar to learn about the ease and simplicity of FARO products and solutions in creating efficiencies in the automotive assembly plant.
 

 

Webinar Details


Industry Trends

In recent years, the increased stringent tolerant requirements on the manufactured parts for the automotive industry have led manufacturers to leverage on technology to improve their inspection process and also streamlined its workflow to reduce rejection rate and improve production yield. In addition, the product life cycle of a vehicle model is getting shorter and time to market has to be accelerated in order to stay ahead of the competition.

Today, companies have started to recognize the benefits of utilizing portable 3D metrology in the production process to solve most of the measurement problems which the traditional methods are not able to overcome.

The common applications for 3D portable metrology include tactile and non-contact measurement for inspection and tooling processes. These measurement tasks, which are time consuming, laborious and not precise with the traditional method, can be done faster and economically with FARO 3D metrology solutions.

Webinar Topics

  • Plant Design
  • Assembly Line Tooling Installation
  • Checking Fixture Setup and Certification
  • Root Cause Analysis
  • Assembly Line Maintenance
  • Online Inspection
  • Replacement of Stationary CMMs
  • Case Studies

Industries

  • Automotive

 

Related FARO Products


FaroArm

FaroArm

The FaroArm is the preeminent portable coordinate measuring machine (PCMM) that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis, reverse engineering, and more.

FARO ScanArm

FARO ScanArm

The Quantum ScanArm HD is ideal for inspection and quality control, offering capabilities such as point cloud comparison with CAD, rapid prototyping, reverse engineering, and 3D modeling of free-form surfaces.

FARO Laser Tracker

FARO Laser Tracker

FARO Laser Trackers optimize workflow productivity management for large-scale metrology applications including, but not limited to, assembly alignment, part and assembly inspection, machine installation and alignment, and reverse engineering.

FARO Cobalt Array Imager

FARO Cobalt Array Imager

The FARO Cobalt Array Imager is a metrology-grade non-contact scanner which utilizes blue light technology to capture millions of high resolution 3D coordinate measurements in seconds.

 

Webinar: Boosting Accuracy and Productivity of Measurement Tasks in Inspection and Maintenance Processes with FARO Metrology Solutions

Proven Workflows for Measuring Turbine Blade, Wind Propeller Hub, and Transmission Pipe in the Energy Producing Industry

Webinar Overview:


This webinar aims to familiarize you with the latest 3D metrology technology which can be used to perform various critical inspection and maintenance tasks within the energy and natural resources industry. These include non-contact inspection of turbine blade, tactile measurement of large wind propeller hub and dimensional inspection of energy transmission pipe.
 
Join us in this webinar to learn about the ground breaking simplicity of FARO integrated solution in improving processes and product quality in the energy and natural resources industry.
 

 

Webinar Details


Industry Trends

In recent years, the increased stringent tolerant requirements on the manufactured parts for the Energy and Natural Resources industry have led manufacturers to leverage on technology to improve inspection processes and streamline workflows to improve production yield. In addition, the liberalization of the energy market has changed the entire landscape and energy producing companies have to be more efficient and reduce outages downtime to stay competitive.

Today, companies have started to recognize the benefits of portable 3D metrology as part of the component production and repair process as it solves problems that traditional methods faced.

The common applications for 3D portable metrology include tactile and non-contact measurement for inspection and alignment processes. These measurement tasks, which are time consuming, laborious and not precise with the traditional methods, can be done faster and economically with FARO 3D metrology solutions.

Webinar Topics

  • Energy Production Processes
  • Overview of FARO Solutions
  • Benefits of FARO Metrology Solutions over Traditional Instruments
  • Typical Applications with FARO Metrology Solutions with Streamlined Workflows from Measurement to Deliverables
    • Power Generator Turbine Blade Measurement
    • Energy Transmission Pipe Measurement
    • Wind Propeller Hub Measurement
  • Case Studies

Industries

  • Electricity Generation
  • Gas/Stream Generation
  • Heavy Machinery
  • Mechanical Engineering
  • Metal Fabrication
  • Measurement Services
  • Machine Shop

 

Related FARO Products


FaroArm

FaroArm

The FaroArm is the preeminent portable coordinate measuring machine (PCMM) that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis, reverse engineering, and more.

FARO ScanArm

FARO ScanArm

The Quantum ScanArm HD is ideal for inspection and quality control, offering capabilities such as point cloud comparison with CAD, rapid prototyping, reverse engineering, and 3D modeling of free-form surfaces.

 

Webinar: Improve Workflow of Construction and Building Modeling with FARO 3D Scanning Solutions

Webinar Overview:


Using various real-world case studies, this webinar will illustrate proven workflows that many users can benefit from. In many cases the work time and cost can be reduced significantly when compared to traditional approaches. The webinar will show the total solutions from scanning to final deliverables to be used with most of the professional design software such as AutoCad. The presented workflows are fast, precise and easy-to-use, which is important for users who might not be experts in the CAD software.

This webinar is aimed at construction managers and engineers, Design Managers and engineers and Architect Managers and Engineers. Join us in this webinar to learn about the ease and simplicity of FARO integrated solution in improving construction processes and building quality.
 

 

Webinar Details


Industry Trends

In recent years, 3D laser scanning has been successfully introduced into many fields as it offers an accurate, fast, and reliable technique for Capturing As-Built Reality in the construction industry.

As the construction industry gets more competitive and the average construction project’s timeline gets compressed, the design and construction professionals have to adopt new technology to construct building and infrastructure faster and cheaper. Today, the Building and Construction firms have started to recognize the benefits of laser scanning as part of the construction and verification process during a typical project lifecycle. 3D Laser scanning is the perfect solution to capture all the needed data here. The common applications for 3D Laser scanning includes as-built documentation, BIM modeling, creating 2D plan, inspection of facade verticality and floor flatness. These documentation tasks, which are time consuming, laborious and not precise with the traditional method, can be done faster and economically with FARO 3D documentation solution.

This webinar will familiarize you with the latest 3D Scanning technology to capture existing conditions and to create the final deliverables for various critical tasks within the Architecture, Engineering and Construction (AEC) industry. These include 2D documentation with floor plans, sections and elevations, inspection of As-built for verticality and floor flatness and 3D documentation. The presentation will also focus on the creation of 3D BIM Models out of laser scans in Autodesk Revit.

Webinar Topics

  • Overview of Construction Industry’s Key Challenges
  • Benefits of 3D Laser Scanning Solution for As-Built Documentation
  • How 3D Laser Scanner Capture Physical Structures into Point Clouds
  • How-to Steps by Step Guide from 3D Scanning to 2D Drawing/3D Building Modeling
  • Highlights of 3 Common Applications in the Construction Industry
    • 2D As-Built Drawing – Fast and Accurate Documentation Solution
    • Inspection for Verticality and Floor Flatness – Fast and Simple-to-Use Verification Solution
    • 3D Building Modeling – From Point Clouds to 3D Building Modeling to Final Deliverables for Popular Design Software such as AutoCad Revit
  • Success Stories in the Construction Industry

Industries

  • Architecture, Engineering and Construction (AEC)

 

Related FARO Products


FARO Focus Laser Scanner

FARO Focus Laser Scanner

Laser Scanner for fast and exact indoor and outdoor measurements in three dimensions, perfect for 3D documentation and surveying in AEC, public safety – forensics and product design.

FARO 3D Software

FARO 3D Software

Solutions for Architecture, Engineering and Construction.

 

Webinar: Consistent and Fast 3D Measurement Solution to Boost Business Productivity

Webinar Overview:


Using various real-world case studies, this webinar will illustrate proven workflows that many users can benefit from. In many cases the work time and cost can be reduced significantly when compared to traditional approaches. The webinar will show the total solutions from scanning to processing of the point cloud directly. The presented workflows are fast, precise and easy-to-use, which is important for users who might not be experts in the CAD software.
 
This talk is aimed at QC managers and engineers, Production Managers and engineers and R&D Managers and Engineers. Join us in this webinar to learn about the ease and simplicity of FARO integrated solution in improving production processes and product quality.
 

 

Webinar Details


Industry Trends

In recent years, there has been increasing need for tighter manufacturing tolerance in the metalworking, machinery and assembly industry. This has made some of the traditional measurement methods obsoleted and the manufacturers have to employ new measurement technology in order to stay relevant and continue to meet their customers’ more stringent product requirements.

The quality inspection, measurement, tool alignments and reverse engineering are some of the major tasks in the manufacturing process which are usually labor intensive and time-consuming; yet this is one of the most critical processes which can determine the yield level and end-customers’ satisfaction. Some of the pain points in measurement are usually the lack of CAD data of existing parts, inconsistent measurements by different operators, and slow measurement process.

Unlike other measurement solutions, FARO’s proven portable 3D measurement solution enables you to deploy it flexibly and start your process immediately on-site at the shop floor. In addition, FARO’s 3D measurement solution is fast and accurate which can help to solve most the daily measurement bottlenecks in the production process.

Learn the best practices from this webinar on our FARO’s 3D portable measurement technology; how it can help to drive up business productivity and boost yield and profitability. Some of the application highlights are casting and molding, assembly, and jigs and fixture.

Webinar Topics

  • Overview of 3D Measurement Solution
  • What are the Common Applications in the Metalworking, Machinery and Assembly Industry
  • Benefits of 3D Portable Metrology Solution VS Traditional Equipment
  • How-to Step by Step Guide from Datum Registration to Data Output
  • Highlight of 3 Typical Applications in the Metalworking, Machinery and Assembly Industry
    • Assembly of Plane Seats – Consistent and Accurate Measurement Solution
    • Jigs and Fixture for Welding – Co-ordinate Inspection System on Weld Points
    • Casting Parts – Quality Inspection at Large Scale
  • Success Stories in the MetalWorking, Machinery and Assemble Industry

Industries

  • MetalWorking
  • Machinery
  • Assembly

 

Related FARO Products


FaroArm

FaroArm

The FaroArm is the preeminent portable coordinate measuring machine (PCMM) that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis, reverse engineering, and more.

FARO ScanArm

FARO ScanArm

The Quantum ScanArm HD is ideal for inspection and quality control, offering capabilities such as point cloud comparison with CAD, rapid prototyping, reverse engineering, and 3D modeling of free-form surfaces.

FARO Laser Tracker

FARO Laser Tracker

FARO Laser Trackers optimize workflow productivity management for large-scale metrology applications including, but not limited to, assembly alignment, part and assembly inspection, machine installation and alignment, and reverse engineering.

 

Webinar: Proven Workflows for As-built Documentation of Industrial Facilities from 3D Point Clouds

Webinar Overview:


In mining sites the evaluations of volumes, crest and toe and of several deliverables are easily extracted from the 3D point clouds. A crucial need it is also the use of carthographic large coordinates, the free target registration and the UNION with GNSS and total stations grid data.

3D Laser scanning can answer to all of these needs with our easy-to-use software packages and solutions which help you to reduce time and increase productivity for all of your surveying activities in the mining and construction industries.

Learn the best practices and success stories from the experts in this webinar which will improve the operation time for your surveying tasks tremendously.
 

 

Webinar Details


Industry Trends

In recent years, 3D laser scanning has been successfully introduced into many fields as it offers an accurate, fast, and reliable technique for Capturing As-Built Reality in the construction & mining industry. The 3D laser scanning has become the standard method to measure, check and extract As-Built information in construction and mining sites.

While the construction industry is often considered to be a slow adopter of new technology, design and construction professionals are challenging themselves to build projects faster and cheaper with the use of technologies or Processes like BIM. Engineering and consulting firms are recognizing the benefits, laser scanning can bring to their clients and operations.

Typical 3D scanning application at the mining and construction sites include Volume Calculations, Blast Planning, Deformation Monitoring, Slope Monitoring, Equipment Health monitoring & Fault Studies with in an Mining Environment, creating 2D Construction Drawings, 3D Models, Floor Flatness to comparing As-Built with the Design Intent.

Webinar Topics

  • What is 3D Terrestrial Laser Scanner
  • What are the typical applications for the Mining and Construction Industry
  • Benefits of 3D Laser Scanning Solution vs Traditional TLS
  • How-to Steps by Step Guide from 3D Scanning to Data Output
  • Successful Applications in the Mining Industry
    • GPS and 3D Laser Survey: Benefit of the New Technology
    • Free Target Registration
    • Easy Cartographic Coordinates Management
    • Volume and Cut&Fill Calculation
    • Breaklines and Isolines Extraction
  • Successful Applications in the Construction Industry
  • CAD drawing & Orthopoto Creation: CAD Overlapping
  • Change Detection Analysis
  • 4D Inspector: Real-Time Building Monitoring

Industries

  • Mining & Construction

 

Related FARO Products


FARO Focus Laser Scanner

FARO Focus Laser Scanner

Laser Scanner for fast and exact indoor and outdoor measurements in three dimensions, perfect for 3D documentation and surveying in AEC, public safety – forensics and product design.

FARO Freestyle3D Handheld 3D Scanner

FARO Freestyle3D Scanner

The FARO Freestyle3D is a top-quality high-precision handheld scanner. It quickly and reliably documents rooms, structures and objects in 3D and creates high-definition point clouds.

 

Webinar: Mobile Precision Made Easy with Portable 3D Coordinate Technology in Automotive Applications

Webinar Overview:


3D technology has revolutionized our world. Today, we stand at the beginning of an industrial development that is expeditiously gaining speed. This influences production processes in the automotive industry.
 
Adjustments can be made very quickly and inspected immediately on-site at the production facility with the portable measurement systems, in addition, it is also used to ensure precision and exact fitting during manufacturing of components. Advancement in, and simplification of, technologies such as the articulating Arm, Laser Tracker and Laser Scanner are gradually pushing measurement functions out from the metrology laboratory, onto shop floors and out onto the field.
 
Join us in this webinar to learn about the ease and simplicity of FARO integrated solution in improving processes and product quality.
 

 

Webinar Details


Webinar Topics

  • Metrology Trend in the Smart Automotive Industry
  • 3D Portable Coordinate System Based Metrology
  • Portable Metrology Solutions for Automotive Applications
    • Research and Development
    • In-line Inspection
    • Heavy Vehicle Frame and Structure
  • Benefits of Portable 3D Coordinate Metrology

Related Industry

  • Automotive

 

Related FARO Products


FaroArm

FaroArm

The FaroArm is the preeminent portable coordinate measuring machine (PCMM) that allows manufacturers easy verification of product quality by performing 3D inspections, tool certifications, CAD comparison, dimensional analysis, reverse engineering, and more.

FARO ScanArm

FARO ScanArm

The Quantum ScanArm HD is ideal for inspection and quality control, offering capabilities such as point cloud comparison with CAD, rapid prototyping, reverse engineering, and 3D modeling of free-form surfaces.

FARO Laser Tracker

FARO Laser Tracker

FARO Laser Trackers optimize workflow productivity management for large-scale metrology applications including, but not limited to, assembly alignment, part and assembly inspection, machine installation and alignment, and reverse engineering.

 

Register for an Account