Machined parts come in a diverse range of shapes and sizes, and flexible 3D metrology tools for part inspection and dimensional analysis are required to verify their accuracy and quality.
Many machine shops are now equipped with portable CMMs from FARO®, such as measuring arms and laser trackers. These meet a variety of dimensional measurement needs, such as on-machine and in-process inspection, and CAD comparison to ensure proper tolerances are achieved.
FARO Enables a Five-fold Increase in Measurement Efficiency for Calsonic Kansei Korea
Automotive: Calsonic Kansei Korea Co., Ltd
“I remember my first encounter with the FaroArm, where we used it to survey contour lines and the cross-section of our pipes and pressed parts,” recalled the Deputy Head of the Quality Assurance team. “It worked very well!”.
Callies Performance Stays Ahead of the Competition Using FaroArms
“We use the FaroArm for many different measurements and programs. FARO saves us a lot of time in many instances and that means it saves us money. We have seen not only reduced time and money savings, but we have also improved our processes and capabilities. We have definitely benefited from the use of FARO.”
Goldens’ Foundry Reduces Inspection Times by Over 90% using a FARO Edge
The fast, and easy, setups with the Edge have greatly impacted the overall efficiency of the floor. Total check time for parts that once took 45 minutes and three position changes on a traditional CMM, are now done in only 2 and half minutes using the FARO Edge – a reduction of over 90%.
G5 Outdoors Uses FARO Gage to Create Inspection Efficiencies
“You are only as good as you can measure.” The level of manufacturing expertise rises only to the level of the quality department’s ability to check a part. To this day, both G5 and Grace Engineering adhere to this philosophy by continuously honing their measuring skills to keep up with the latest techniques and equipment.
Privacy Policy | Legal Notices | Sitemap | © 2017 FARO Technologies, Inc.
Our site has been updated.
If you already have an account, please register again.
