FARO® Vantage Laser Trackers

Large-Scale, Portable, High-Accuracy 3D Measurement

FARO<sup>®</sup> Vantage Laser Trackers


FARO Vantage® Laser Trackers optimize workflow productivity for large-scale metrology applications including, but not limited to, assembly alignment, part and assembly inspection, machine installation and alignment, and reverse engineering.

Both compact and portable; the Vantage line of laser trackers offers an array of amazing features:

  • ActiveSeek technology that allows the laser trackers to find and follow the target, even after the user passes behind obstructions.
  • 6DoF (6 Degrees of Freedom) Handheld 6-Probe enables the user to measure hidden areas that are not in direct line of sight, as well as small, tight, hard-to-reach areas.
  • High-Speed Dynamic Measurement
  • RemoteControls Workflow
  • Exceptional Portability and Ruggedness
  • Easy Integration with FARO’s Patented Super 6DoF TrackArm Solution
FARO Vantage Laser Tracker

FARO Vantage Laser Tracker

The FARO Vantage Laser Trackers are high-performance, high-value laser trackers which allow users to maximize productivity and reduce inspection cycle times by 50% to 75%. So these laser trackers set the standard in workflow productivity management for metrology applications.

Use the table below to evaluate the Vantage model that is best suited for your requirements.

  VantageS6 VantageE6 VantageS VantageE
Measurement Volume (Diameter)        
 Spherically-Mounted Retroreflector (SMR) 160m(524.9ft)   70m(229.7ft)  160m(524.9ft)  70m(229.7ft)
 6DoF (6Probe) *  30m(98.4ft)  30m(98.4ft)          –         –
 Super 6DOF  120m(393.7ft)  70m(229.7ft)  120m(393.7ft)  70m(229.7ft)
 Dynamic Measurement Speed (Points/Sec)  1,000 1,000 1,000 1,000
 ActiveSeek        ✔        ✔       ✔       ✔
 RemoteControls        ✔        ✔       ✔       ✔

* Minimum measurement range for 6Probe is 2.5m

FARO Super 6DoF (6 Degrees of Freedom) TrackArm

FARO Super 6DoF (6 Degrees of Freedom) TrackArm

Measure anything, any size, anywhere, at a fraction of the cost of other comparable systems

The FARO Super 6DoF TrackArm combines the FARO Vantage Laser Tracker platform (VantageS6, VantageE6, VantageS, VantageE, or legacy Vantage) with one or more FARO ScanArms to provide a large-scale, six-degrees-of-freedom capability for both probing and scanning. Switching between the Tracker and the Arm, users can reach hidden points – even around corners and inside hole features. Line-of-sight issues are eliminated.

The Super 6DoF TrackArm is available as a complete system consisting of the laser tracker, FaroArm or ScanArm, and TrackArm Kit. Typical measurement performance: 80µm + 5 µm/m

Click here to Learn more about Super 6DoF TrackArm


Need assistance with your FARO product?

Visit Technical Support

Our site has been updated.

If you already have an account, please register again.