In the past, machine shop inspection has required the removal of parts from a CNC machine to a temperature controlled inspection area for surface inspection or dimensional inspection of the part. This is time-consuming and expensive. Fortunately, incorporating portable CMMs from FARO® directly into production lines can streamline this process.
The portability of FARO’s 3D metrology tools, like the measuring arm, enables efficient in-line, in-process and on-machine inspections. This delivers consistent, accurate measurements directly on or at the machine producing the parts.
Ensuring Precision & Efficiency with FARO’s Measurement Solutions
Machine Tools: Jendamark Techcellency
FARO’s measurement solutions provided Jendamark Techcellency with support throughout pre-production, production, and post-production processes, eliminating concerns about human error and lengthy measurement times. Jendamark Techcellency was then better able to increase process efficiency without compromising on the quality and precision of its products.
Machinist Achieves Greater Customer Satisfaction Levels with FARO
Machine Tools: Techno Engineers
Mr. Amit Singh, Technical Head at Techno Engineers, revealed, “Our work requires measurements to be performed at every stage of production, whether it’s first article inspection, in-process inspection, machine calibration, or alignment. Careful measurements at every step of the way helps us to make sure quality is not compromised at the fundamental level.”
Complete Measurement Solution for Consistent Quality Management
Specialist Machine Shop Enjoys New Capabilities & 50% Time-savings
Machine Shop: MRP Engineering Co., Ltd.
The objects that MRP work with typically measure 1 to 4 m in length, and weigh anywhere between 20 kg and 50 tonnes. For assemblies and turn-key projects, measurement distances range from 20 to 30 m. The implicit challenge for the QA team is that the solution they select must be flexible yet accurate enough to handle various types of measurements.
FARO Enables a Five-fold Increase in Measurement Efficiency for Calsonic Kansei Korea
Automotive: Calsonic Kansei Korea Co., Ltd
“I remember my first encounter with the FaroArm, where we used it to survey contour lines and the cross-section of our pipes and pressed parts,” recalled the Deputy Head of the Quality Assurance team. “It worked very well!”
Privacy Policy | Legal Notices | © 2018 FARO Technologies, Inc.
